Archived - Chapter 75 - T2017-4
Nickel and articles thereof

We have archived this page on the web

Information identified as archived is provided for reference, research or recordkeeping purposes. It is not subject to the Government of Canada Web Standards and has not been altered or updated since it was archived. Please contact us to request a format other than those available.

Visit Canadian customs tariff for the current tariff files and supporting information.

Tools

PDF (49 KB) [help with PDF files]

Notes.

1. In this Chapter the following expressions have the meanings hereby assigned to them:

(a) Bars and rods

Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width. The expression also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

(b) Profiles

Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. The expression also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

(c) Wire

Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width.

(d) Plates, sheets, strip and foil

Flat-surfaced products (other than the unwrought products of heading 75.02), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:

Heading 75.06 applies, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.

(e) Tubes and pipes

Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular, or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be considered as tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.

Subheading Notes.

1. In this Chapter the following expressions have the meanings hereby assigned to them:

(a) Nickel, not alloyed

Metal containing by weight at least 99% of nickel plus cobalt, provided that:

Table - Other elements
 Element Limiting content % by weight
 Fe - Iron 0.5
 O - Oxygen 0.4
 Other elements, each 0.3

(b) Nickel alloys

Metallic substances in which nickel predominates by weight over each of the other elements provided that:

2. Notwithstanding the provisions of Chapter Note 1 (c), for the purposes of subheading 7508.10 the term "wire" applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.

Supplementary Note.

1. In this Chapter the expression "unworked", when referring to foil, means products which have not been processed beyond the condition as from the rolling mill (for example, not machined, cut to shape, perforated or coated).

Statistical Note.

(NB This note does not form part of the Customs Tariff legislation.)

1. For the purpose of subheading 7501.10, the unit of measure (kilogram) refers to the nickel content of the matte and shall be the assay quantity without deductions.

Customs Tariff Schedule

Tariff Item SS Description of Goods Unit of Meas. MFN Tariff Applicable Preferential Tariffs
Tariff ItemSSDescription of GoodsUnit of Meas.MFN TariffApplicable Preferential Tariffs
75.01 Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy.   
7501.10.0000Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy. - Nickel mattesKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7501.20.0000Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy. - Nickel oxide sinters and other intermediate products of nickel metallurgyKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
75.02 Unwrought nickel.   
7502.10.0000Unwrought nickel. - Nickel, not alloyedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7502.20.0000Unwrought nickel. - Nickel alloysKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7503.00.0000Nickel waste and scrap.KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7504.00.00 Nickel powders and flakes.KGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7504.00.0010Nickel powders and flakes. - Powders, containing by weight 60% or more of nickel: - PowdersKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7504.00.0090Nickel powders and flakes. - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
75.05 Nickel bars, rods, profiles and wire.   
7505.11.0000Nickel bars, rods, profiles and wire. - Bars, rods and profiles: - Of nickel, not alloyedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7505.12.0000Nickel bars, rods, profiles and wire. - Bars, rods and profiles: - Of nickel alloysKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7505.21.0000Nickel bars, rods, profiles and wire. - Wire: - Of nickel, not alloyedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7505.22.0000Nickel bars, rods, profiles and wire. - Wire: - Of nickel alloysKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
75.06 Nickel plates, sheets, strip and foil.   
7506.10 Nickel plates, sheets, strip and foil. - Of nickel, not alloyed   
7506.10.1000Nickel plates, sheets, strip and foil. - Of nickel, not alloyed - Worked foil of a thickness not exceeding 0.15 mmKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7506.10.9000Nickel plates, sheets, strip and foil. - Of nickel, not alloyed - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7506.20 Nickel plates, sheets, strip and foil. - Of nickel alloys   
7506.20.1000Nickel plates, sheets, strip and foil. - Of nickel alloys - The following foil of a thickness not exceeding 0.15 mm:Unworked, containing by weight less than 60% of nickel;WorkedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7506.20.9000Nickel plates, sheets, strip and foil. - Of nickel alloys - OtherKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
75.07 Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves).   
7507.11.0000Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). - Tubes and pipes: - Of nickel, not alloyedKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7507.12.0000Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). - Tubes and pipes: - Of nickel alloysKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7507.20.0000Nickel tubes, pipes and tube or pipe fittings (for example, couplings, elbows, sleeves). - Tube or pipe fittingsKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
75.08 Other articles of nickel.   
7508.10.0000Other articles of nickel. - Cloth, grill and netting, of nickel wireKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7508.90 Other articles of nickel. - Other   
7508.90.1000Other articles of nickel. - Other - Anodes for electroplatingKGMFreeCCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
7508.90.9000Other articles of nickel. - Other - OtherKGM3%CCCT, LDCT, GPT, UST, MT, MUST, CIAT, CT, CRT, IT, NT, SLT, PT, COLT, JT, PAT, HNT, KRT, UAT: Free
Date modified: